LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Odyssey EX >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Drive Belt Replacement >> J35A7 engine

J35A7 engine

  1. Set a socket wrench into the drive belt auto-tensioner (A), and slowly turn the wrench in the direction of the rotation arrow, then remove the drive belt (B).
    NOTE: This is a hydraulic type auto-tensioner, so you must turn the wrench slowly.
    Fig 1: Identifying Drive Belt Auto-Tensioner And Drive Belt
    G05522647Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install the new belt in the reverse order of removal.
NOTE: For belt routing, see COMPONENT LOCATION INDEX & DRIVE BELT ROUTING .
scientia non olet · About LEMON Manuals