Crankshaft Position Sensor: Inspection

WARNING: This page is about a different car, the 2007 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT CRANKSHAFT POSITION SENSOR
1. Check the resistance.
  1. Using an ohmmeter, measure the resistance between the terminals.
    Standard:
    
    1850 to 2450 Ω at 20°C (68°F)
    
    If the result is not as specified, replace the crankshaft position sensor.
    
    Fig 1: Measuring Resistance Between Terminals
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002