Front No. 2 Speaker: Removal

WARNING: This page is about a different car, the 2007 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedures for the RH and LH sides.
The procedures listed below are for the LH side.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Door Lock) (See DISASSEMBLY )
REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (w/ Power Door Lock) (See DISASSEMBLY )
REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH (See DISASSEMBLY )
REMOVE FRONT DOOR TRIM PANEL ASSEMBLY LH (See DISASSEMBLY )
REMOVE FRONT NO. 2 SPEAKER ASSEMBLY
1. Disconnect the connector.
2. Remove the 2 bolts.
  
  Fig 1: Removing Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disengage the claw and remove the front No. 2 speaker assembly.
  
  Fig 2: Removing Front No. 2 Speaker Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002