Section 21 (Charging System (2TR-FE)): Generator: Removal: Notes

WARNING: This page is about a different car, the 2007 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE FAN AND GENERATOR V BELT (See REMOVAL )
REMOVE GENERATOR ASSEMBLY
1. Remove the terminal cap.
2. Remove the nut, then remove the generator wire.
3. Disconnect the generator connector.
  
  Fig 1: Identifying Generator Wire
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the 2 bolts, then remove the generator.
  
  Fig 2: Identifying Generator Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002