Fuel Pump Resistor: Inspection

WARNING: This page is about a different car, the 2007 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT FUEL PUMP RESISTER
1. Check the resistance.
  1. Using an ohmmeter, measure the resistance between the terminals.
    Resistance: 0.71 to 0.75 Ω
    
    If the result is not as specified, replace the fuel pump resistor.
    
    Fig 1: Measuring Resistance Between Terminals Using Ohmmeter
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002