LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Fit Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Fuel System (1GR-FE)) >> Fuel Pressure Regulator >> Installation

Fuel Pressure Regulator: Installation

WARNING: This page is about a different car, the 2007 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY 
    1. Install the vacuum hose.
    2. Apply a light coat of spindle oil or gasoline to a new O-ring and install it onto the fuel pressure regulator.
    3. Install the fuel pressure regulator with the 2 bolts.

      Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf) 

  2. CONNECT NO.2 FUEL PIPE SUB-ASSEMBLY (See  INSTALLATION   ) 
  3. INSTALL AIR CLEANER ASSEMBLY (See  INSTALLATION  ) 
  4. INSTALL V-BANK COVER (See  INSTALLATION  ) 
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf) 

  6. CHECK FOR FUEL LEAKAGE 
scientia non olet · About LEMON Manuals