LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Fit Base, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Alternator Control Circuit Troubleshooting >> Drive Belt Replacement

Drive Belt Replacement

  1. Loosen the lock bolt (A), the mounting bolt (B), and the adjusting bolt (C), then remove the drive belt (D).
    Fig 1: Identifying Lock Bolt, Mounting Bolt, Adjusting Bolt And Drive Belt
    G05454053Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install the drive belt in the reverse order of removal.
    NOTE: For belt routing, see COMPONENT LOCATION INDEX & DRIVE BELT ROUTING .
  3. Adjust the drive belt tension (see DRIVE BELT INSPECTION AND ADJUSTMENT ).
scientia non olet · About LEMON Manuals