Tailgate Lock Cylinder Replacement

NOTE: Put on gloves to protect your hands.

Remove the tailgate lower trim panel (see TRIM REMOVAL/INSTALLATION - TAILGATE AREA ).
Disconnect the tailgate cylinder rod (A).
NOTE: Check for damaged or stress-whitened rod fastener (B).

Fig 1: Disconnecting Tailgate Cylinder Rod
Remove the bolt securing the lock cylinder (A), then remove the lock cylinder by turning it.

Fig 2: Removing Lock Cylinder
Install the lock cylinder in the reverse order of removal, and note these items:
- Make sure the cylinder rod is connected properly.
- Make sure the tailgate opens properly and locks securely.