LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Fit Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Transmission End Cover >> Transmission Fluid Pressure Switch Replacement

Transmission Fluid Pressure Switch Replacement

  1. Remove the 2nd clutch transmission fluid pressure switch (A).
    Fig 1: 2nd Clutch Transmission Fluid Pressure Switch And Sealing Washer With Torque Specifications
    G05455477
  2. Make sure there is no water, oil, dust, or foreign particles inside the connector.
  3. Install the new 2nd clutch transmission fluid pressure switch and a new sealing washer (B), and tighten the metal part of the switch.
  4. Remove the 3rd clutch transmission fluid pressure switch (C).
  5. Make sure there is no water, oil, dust, or foreign particles inside the connector.
  6. Install the new 3rd clutch transmission fluid pressure switch and a new sealing washer (D), and tighten the metal part of the switch.
scientia non olet · About LEMON Manuals