Selector Control Shaft Bearing Replacement

Special Tools Required 

• Driver 07749-0010000
• Attachment, 22 x 24 mm 07746-0010800

1. Remove the oil seal from the end cover.
   Fig 1: Identifying Oil Seal From End Cover

   
2. Remove the selector control shaft bearing from the end cover.
   Fig 2: Removing Selector Control Shaft Bearing From End Cover

   
3. Install the new bearing flush with the end cover using the driver and the attachment (22 x 24 mm).
   Fig 3: Installing Bearing Flush With End Cover

   
4. Install the new oil seal flush with the end cover using the driver and the attachment (22 x 24 mm).
   Fig 4: Installing Oil Seal Flush With End Cover