LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Fit Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Transmission End Cover >> ATF Feed Pipe Replacement

ATF Feed Pipe Replacement

  1. Remove the snap ring (A), the 3rd clutch feed pipe (B), and the feed pipe flange (C) from the end cover (D).
    Fig 1: Identifying Snap Ring, 3rd Clutch Feed Pipe, Feed Pipe Flange, End Cover And O-Ring
    G05455476
  2. Install the new O-ring (E) over the 3rd clutch feed pipe.
  3. Install the 3rd clutch feed pipe in the end cover by aligning the feed pipe tabs (F) with the indentations in the end cover.
  4. Install the new O-ring (G) in the end cover, then install the feed pipe flange over the 3rd clutch feed pipe.
  5. Secure the 3rd clutch feed pipe and the feed pipe flange with the snap ring.
  6. Remove the snap ring (H) and the feed pipe flange (I).
  7. Check the 4th clutch feed pipe (J) and the 2nd clutch feed pipe (K) for scoring and damage. Replace the end cover, if the feed pipe is scored or damaged.
  8. Install the new O-ring (L) over the 4th clutch feed pipe.
  9. Install the new O-ring (M) in the end cover, then install the feed pipe flange over the 4th clutch feed pipe.
  10. Secure the 4th clutch feed pipe and the feed pipe flange with the snap ring.
scientia non olet · About LEMON Manuals