LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Fit Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> A/T Differential >> Backlash Inspection

Backlash Inspection

  1. Install both axles into the differential, and place the axles on V-blocks (A).
    Fig 1: Measuring Backlash Of Pinion Gears With Dial Indicator
    G05455621
  2. Measure the backlash of the pinion gears (B) with a dial indicator (C).

    Standard: 0.05-0.15 mm (0.002-0.006 in.) 

  3. If the backlash is out of standard, replace the differential carrier (see DIFFERENTIAL CARRIER AND FINAL DRIVEN GEAR REPLACEMENT ).
scientia non olet · About LEMON Manuals