LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Fit Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Seats >> Rear Seat-back Hinge Replacement

Rear Seat-back Hinge Replacement

NOTE:
  • Put on gloves to protect your hands.
  • Take care not to tear the seams or damage the seat covers.
  1. Remove the rear seat assembly (see REAR SEAT REMOVAL/INSTALLATION ).
  2. Release the push nut (A) from the seat-back hinge (B),then remove the pivot pin (C), pivot collars (D), and hinge from the seat-back frame (E). The inside hinge of each seat-back frame is shown. The outside hinges of them are symmetrical.
    Fig 1: Identifying Seat-Back Hinge, Pivot Pin, Pivot Collars And Seat-Back Frame
    G05456345Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Reassemble the seat-back in the reverse order of disassembly, and replace any push nuts you removed with new ones.
scientia non olet · About LEMON Manuals