LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Fit Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless/Power Door Locks/Security System >> Door Lock Actuator Test

Door Lock Actuator Test

  1. Remove the door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).
  2. Disconnect the 2P connector (A) from the actuator (B).
    Fig 1: Identifying Door Lock Actuator 2P Connector Terminals
    G05456589Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check actuator operation by connecting power and ground according to Fig 2. To prevent damage to the actuator, apply battery voltage only momentarily.
    Fig 2: Connecting Power And Ground Chart
    G05456590Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. If the actuator does not operate as specified, replace it.
scientia non olet · About LEMON Manuals