LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Element SC, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Variable Cylinder Management (VCM) System) >> Front Rocker Arm Oil Pressure Switch Removal/Installation

Front Rocker Arm Oil Pressure Switch Removal/Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Honda Crosstour, 2014 Honda Crosstour, 2013 Honda Crosstour, 2012 Honda Crosstour, and 2011 Honda Accord Crosstour. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover.
  2. Disconnect the front rocker arm oil pressure switch 1P connector (A).
    Fig 1: Identifying Front Rocker Arm Oil Pressure Switch 1P Connector
    G06422750Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the front rocker arm oil pressure switch (B).
  4. Install the parts in the reverse order of removal with a new O-ring (C).
scientia non olet · About LEMON Manuals