LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Element SC, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (PGM-FI System (V6)) >> ECT Sensor 2 Replacement

ECT Sensor 2 Replacement

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Honda Crosstour, 2014 Honda Crosstour, 2013 Honda Crosstour, 2012 Honda Crosstour, and 2011 Honda Accord Crosstour. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine undercover (see ENGINE UNDERCOVER REPLACEMENT (+).
  2. Drain the engine coolant (see COOLANT CHECK (+).
  3. Disconnect the ECT sensor 2 2P connector (A).
    Fig 1: ECT Sensor 2 2P Connector And ECT Sensor 2 With Torque Specifications
    G06422632Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove ECT sensor 2 (B).
  5. Install the parts in the reverse order of removal with a new O-ring (C), then refill the radiator with engine coolant (see COOLANT CHECK (+).
scientia non olet · About LEMON Manuals