DTC P062F: PCM Internal Control Module Keep Alive Memory (KAM) Error

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Honda Crosstour, 2014 Honda Crosstour, 2013 Honda Crosstour, 2012 Honda Crosstour, and 2011 Honda Accord Crosstour. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information (see GENERAL TROUBLESHOOTING INFORMATION (+).

Turn the ignition switch to ON (II).
Clear the DTC with the HAS.
Check for Pending or Confirmed DTCs with the HAS.
Is DTC P062F indicated?

YES -Go to next step.

NO -Intermittent failure, the system is OK at this time.
Update the PCM if it does not have the latest software (see PCM UPDATE (+) or substitute a known-good PCM (see SUBSTITUTING THE PCM (+).
Check for Pending or Confirmed DTCs with the HAS.
Is DTC P062F indicated?

YES -If the PCM was updated, substitute a known-good PCM (see SUBSTITUTING THE PCM (+) then recheck. If the PCM was substituted, go to step 1.

NO -If the PCM was updated, troubleshooting is complete. If the PCM was substituted, replace the original PCM (see PCM REPLACEMENT (+). If any other Pending or Confirmed DTCs are indicated, go to the indicated DTC's troubleshooting.