LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Element SC, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Warning Systems >> Tire Pressure Monitoring System >> TPMS Control Unit Replacement >> '09-11 Models

'09-11 Models

NOTE: Make sure the TPMS control unit mounting bracket is not bent or twisted as this may affect its communication with the tire pressure sensors.
  1. Turn the ignition switch to LOCK (0).
  2. Remove the center panel (see CENTER PANEL REMOVAL/INSTALLATION ).
  3. Remove the audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ).
  4. Disconnect the TPMS control unit connector (A).
  5. Remove the TPMS control unit (B) from the bracket (C).
    NOTE: To disconnect the TPMS control unit from its bracket, insert a small flat-tipped screwdriver between the TPMS control unit and the bracket shown in (D) to release the hook, then slide out the TPMS control unit.
  6. Replace the bracket if necessary.
    NOTE: Once the bolts is loosened apply medium stength liquid thread lock or equivalent to the bolts before installation.
  7. Install the TPMS control unit in the reverse order of removal.
    NOTE: Make sure the TPMS control unit is properly installed. You will hear a click when the TPMS control unit is securely mounted on the bracket.
  8. Connect the HDS and memorize the pressure sensor IDs using the TPMS sensor initializer tool (see MEMORIZING THE TIRE PRESSURE SENSOR ID  ).
scientia non olet · About LEMON Manuals