Transfer Drive Gear Bearing Replacement

Special Tools Required 

• Driver handle, 15 x 135L 07749-0010000
• Attachment, 37 x 40 mm 07746-0010200
• Attachment, 52 x 55 mm 07746-0010400

1. Remove the tapered roller bearing (A) from the transfer drive gear (B) using the driver handle, the 37 x 40 mm attachment, the bearing separator (C), and a press.
   Fig 1: Removing Tapered Roller Bearing From Transfer Drive Gear

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Install the new tapered roller bearing (A) on the transfer drive gear (B) using the driver handle, the 52 x 55 mm attachment, and a press.

Fig 2: Installing Tapered Roller Bearing On Transfer Drive Gear

Courtesy of AMERICAN HONDA MOTOR CO., INC.