2nd Clutch Transmission Fluid Pressure Switch Replacement
- Remove the air cleaner assembly (see AIR CLEANER REMOVAL/INSTALLATION
).
- Disconnect the 2nd clutch transmission fluid pressure switch connector, and remove the 2nd clutch transmission fluid pressure switch (A) and the sealing washer (B).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Install the new 2nd clutch transmission fluid pressure switch with a new sealing washer, and tighten the 2nd clutch transmission fluid pressure switch to the specified torque by turning the metal part, not the plastic part.
- Check the connector for rust, dirt, or oil, and clean or repair if necessary. Then connect the connector securely.
- Install the air cleaner assembly (see AIR CLEANER REMOVAL/INSTALLATION
).