Rocker Arm Oil Pressure Switch Removal/Installation

WARNING: This page is about a different car, the 2011 Honda CR-V and 2010 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the rocker arm oil pressure switch connector (A).

Fig 1: Rocker Arm Oil Pressure Switch Connector, Rocker Arm Oil Pressure Switch And O-Ring With Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the rocker arm oil pressure switch (B).
Install the parts in the reverse order of removal with a new O-ring (C).