LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> CR-V EX, 2.4 RE3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (PGM-FI System) >> Knock Sensor Replacement

Knock Sensor Replacement

WARNING: This page is about a different car, the 2011 Honda CR-V and 2010 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the intake manifold (see INTAKE MANIFOLD REMOVAL AND INSTALLATION ).
  2. Disconnect the knock sensor connector (A).
    Fig 1: Lnock Sensor Connector And Knock Sensor With Torque Specification
    G06610411
  3. Remove the knock sensor (B).
  4. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals