LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> CR-V EX, 2.4 RE3 >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System >> Oil Filter Feed Pipe Replacement

Oil Filter Feed Pipe Replacement

  1. Remove the oil filter base (see OIL FILTER BASE REPLACEMENT ).
  2. Remove the oil filter holder.
    Fig 1: Removing Oil Filter Holder
    G06609509Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the two 20 x 1.5 mm nuts (A) onto the new oil filter feed pipe. Hold one nut with a wrench, then use a second wrench to tighten the other nut.
    Fig 2: Identifying Oil Filter Nut
    G06609510Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Tighten the oil filter feed pipe to the block to 35 N.m (3.6 kgf.m, 26 lbf.ft), then remove the nuts from the oil filter feed pipe.
    NOTE: Apply engine oil to the oil filter feed pipe.
  5. Install the oil filter base (see OIL FILTER BASE REPLACEMENT ).
scientia non olet · About LEMON Manuals