LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2006 >> Ridgeline RT >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Lubrication System) >> Oil Jet Replacement

Oil Jet Replacement

WARNING: This page is about a different car, the 2008 Honda Pilot, 2007 Honda Pilot, and 2006 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crankshaft from the engine block (see CRANKSHAFT AND PISTON REMOVAL ).
  2. Remove the oil jet bolt (A), then remove and discard oil jet (B).
    Fig 1: Removing Oil Jet Bolt With Torque Specifications
    G04244985Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Carefully install the new oil jet and tighten the oil jet bolt.
  4. Install the crankshaft (see CRANKSHAFT AND PISTON INSTALLATION ).
scientia non olet · About LEMON Manuals