Dashboard Power Tailgate Switch Test/Replacement

Remove the driver's switch panel (see DRIVER'S LOWER DASHBOARD SWITCH PANEL REMOVAL/INSTALLATION ).
Push out the power tailgate switch (A) from behind the dashboard, and disconnect the 5P connector (B) from switch.

Fig 1: Pushing Out Power Tailgate Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Check for continuity between the terminals in each switch position according to the table shown in Fig 2.

Fig 2: Checking Continuity Between Terminals In Each Switch Position Table
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the continuity check is not as specified, replace the illumination bulb (C) or the switch.

Fig 3: Replacing Illumination Bulb Or Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.