LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2006 >> Civic Hybrid, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Intake Air System (Hybrid) >> Throttle Body Test >> Throttle Position Learning Check

Throttle Position Learning Check

NOTE: If the malfunction indicator lamp (MIL) has been reported on, check for diagnostic trouble code (DTCs).
  1. Connect the HDS to the data link connector (DLC) (A) located under the driver's side of the dashboard.
    Fig 1: Identifying Data Link Connector
    G05533420Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Turn the ignition switch ON (II).
  3. Make sure the HDS communicates with the PCM. If it doesn't, go to DLC CIRCUIT TROUBLESHOOTING .
  4. Select the INSPECTION MENU with the HDS.
  5. Do the TP POSITION CHECK in the ETCS TEST. If needed, clean the throttle body (see THROTTLE BODY CLEANING  ).
scientia non olet · About LEMON Manuals