LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2006 >> CR-V SE >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System >> Oil Filter Feed Pipe Replacement

Oil Filter Feed Pipe Replacement

  1. Remove the oil filter (see ENGINE OIL FILTER REPLACEMENT  ).
  2. Remove the oil filter feed pipe.
    Fig 1: Removing Oil Filter Feed Pipe
    G03673802Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install two 20 x 1.5 mm nuts (A) onto the new oil filter feed pipe, hold one nut with a wrench, then tighten the other nut.
    Fig 2: Installing Nuts
    G03673803Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Tighten the oil filter feed pipe to the block to 49 N.m (5.0 kgf.m, 36 lbf.ft), then remove the nuts from the oil filter feed pipe.
scientia non olet · About LEMON Manuals