LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2005 >> Odyssey Touring >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating/Air Conditioning >> Mode Control Motor Replacement

Mode Control Motor Replacement

  1. Remove the glove box housing (see LOWER GLOVE BOX REMOVAL/INSTALLATION ).
  2. Disconnect the 7P connector (A) from the mode control motor (B). Remove the self-tapping screws and the mode control motor from the heater unit.
    Fig 1: Disconnecting 7P Connector From Mode Control Motor
    G03706346Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make sure the motor runs smoothly.
scientia non olet · About LEMON Manuals