LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2005 >> Odyssey Touring >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Power Sliding Doors >> Window Position Switch Test

Window Position Switch Test

  1. Remove the sliding door panel (see SLIDING DOOR PANEL REMOVAL/INSTALLATION ).
  2. Disconnect the 2P connector (A) from the window position switch (B).
    Fig 1: Disconnecting 2P Connector From Window Position Switch
    G03707081Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check for continuity between the window position switch 2P connector No. 1 and No. 2 terminals.
    NOTE: Do not touch the sliding door while the window is moving.
    • There should be continuity with the sliding door window closed.
    • There should be no continuity with the sliding door window opened about 3.9 in. (100 mm).
  4. If the continuity is not as specified, replace the switch.
scientia non olet · About LEMON Manuals