LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2005 >> Odyssey Touring >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Power Sliding Doors >> Slide Motor Test

Slide Motor Test

  1. Remove the rear side trim panel (see TRIM REMOVAL/INSTALLATION - REAR SIDE AREA ).
  2. Disconnect the 2P connector (A) from the slide motor (B).
    Fig 1: Disconnecting 2P Connector From Slide Motor
    G03707076Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Test the slide motor by connecting power and ground according to the table.
    Fig 2: Testing Slide Motor By Connecting Power And Ground Table
    G03707077Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. If the motor does not operate, replace the motor.
scientia non olet · About LEMON Manuals