LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2004 >> Element DX, 2.4 YH2, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission) >> General Troubleshooting Information >> PCM Reset Procedure

PCM Reset Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Connect the HDS to the DLC.
  2. Turn the ignition switch ON (II).
  3. Reset the PCM with the HDS.
  4. Turn the ignition switch OFF.
  5. Turn the ignition switch ON (II), and wait for 30 seconds.
  6. Turn the ignition switch OFF, and disconnect the HDS from the DLC.
  7. Do the PCM idle learn procedure (see ECM/PCM IDLE LEARN PROCEDURE ).
scientia non olet · About LEMON Manuals