LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2004 >> Element DX, 2.4 YH1, Standard >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Driver's Window Motor Test >> Pulser Test

Pulser Test

  1. Reconnect the 6P connector to the window motor, and reconnect the 20P connector to the power window master switch.
  2. Check for voltage between the terminals at the driver's power window motor.
    • There should be battery voltage between the No. 6 (+) and No. 4 (-) terminals when the ignition switch is turned ON (II).
    • Connect an analog voltmeter between the No. 5 (+) and No. 4 (-) terminals, and run the window motor down or up. The voltmeter needle should move back and forth alternately between 0 V and about 5 V (a digital voltmeter should show about 2.5 V).
    • Connect an analog voltmeter between the No. 3 (+) and No. 4 (-) terminals, and run the window motor down or up. The voltmeter needle should move back and forth alternately between 0 V and about 5 V (a digital voltmeter should show about 2.5 V).
scientia non olet · About LEMON Manuals