Ignition Coil Removal/Installation

WARNING: This page is about a different car, the 2006 Acura MDX, 2005 Acura MDX, 2004 Acura MDX, and 2003 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Remove the intake manifold cover (A) and ignition coil cover (B).

Fig 1: Removing Intake Manifold Cover And Ignition Coil Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the ignition coil connector (A), then remove the ignition coils (B).

Fig 2: Disconnecting Ignition Coil Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the ignition coils in the reverse order of removal.