Without Power Tailgate
WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear license molding (see step 3 in REAR LICENSE TRIM REPLACEMENT ).
- Disconnect the tailgate opener cable (A) from the tailgate handle (B), and remove the nuts.
- From outside of the tailgate, pull out the tailgate handle, then remove it.
- Install the handle in the reverse order of removal, and note these items:
- Make sure the tailgate opener cable is connected securely.
- Make sure the tailgate opens properly.