VSA Modulator-Control Unit Removal and Installation: Removal

WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

Push down the lock (A) on the VSA modulator-control unit 47P connector (B), and remove the connector.

Fig 1: Pushing Down Lock On VSA Modulator-Control Unit 47P Connector
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the six brake lines from the VSA modulator-control unit (C).
Remove the three 6 mm bolts, then remove the VSA modulator-control unit with bracket (D) from the body.
Remove the three hex bolts, then remove the VSA modulator-control unit from the bracket.