LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2003 >> Odyssey LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (VSA (Vehicle Stability Assist) System Components) >> Sensor Cluster Replacement

Sensor Cluster Replacement

WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Do not damage or drop the sensor as it is sensitive.
  • Do not use an impact wrench.
  1. Remove the driver's seat (see FRONT SEAT REMOVAL/INSTALLATION ).
  2. Disconnect the sensor cluster connector (A).
    Fig 1: Disconnecting Sensor Cluster Connector
    G03705665Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the sensor cluster (B).
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals