Climate Control Power and Ground Circuit Troubleshooting.
- Check the No. 3 (7.5A) fuse in the driver's under-dash fuse/relay box, and the No. 13 (7.5A) fuse in the passenger's under-dash fuse/relay box.
Are the fuses OK?
- YES
-
- Without Navigation System: Go to step 2.
- With Navigation System: Go to step 8 .
- NO - Replace the fuse(s) and recheck.
- YES
-
- Disconnect climate control unit connector A (8P).
- Turn the ignition switch ON (II).
- Measure the voltage between the No. 1 terminal of climate control unit connector A (8P) and body ground.Fig 1: Measuring Voltage Between No. 1 Terminal Of Climate Control Unit Connector A (8P) & Body Ground
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Is there battery voltage?
- YES - Go to step 5.
- NO - Repair open in the wire between the No. 3 fuse in the driver's under-dash fuse/relay box and the climate control unit.
- Turn the ignition switch OFF.
- Measure the voltage between the No. 2 terminal of climate control unit connector A (8P) and body ground.Fig 2: Measuring Voltage Between No. 2 Terminal Of Climate Control Unit Connector A (8P) & Body Ground
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Is there battery voltage?
- YES - Go to step 7.
- NO - Repair open in the wire between the No. 13 fuse in the passenger's under-dash fuse/relay box and the climate control unit.
- Check for continuity between the No. 8 terminal of climate control unit connector A (8P) and body ground.Fig 3: Checking Continuity Between No. 8 Terminal Of Climate Control Unit Connector A (8P) & Body Ground
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Is there continuity?
- YES - Check for loose wires or poor connections at climate control unit connector A (8P). If the connections are good substitute a known-good climate control unit and recheck. If the symptom/indication goes away replace the original climate control unit.
- NO - Check for an open in the wire between the climate control unit and body ground. If the wire is OK check for poor ground at G401.
- Disconnect climate control unit connector B (26P).
- Turn the ignition switch ON (II).
- Measure the voltage between the No. 13 terminal of climate control unit connector B (26P) and body ground.Fig 4: Measuring Voltage Between No. 13 Terminal Of Climate Control Unit Connector B (26P) & Body Ground
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Is there battery voltage?
- YES - Go to step 11.
- NO - Repair open in the wire between the No. 3 fuse in the driver's under-dash fuse/relay box and the climate control unit.
- Turn the ignition switch OFF.
- Check for continuity between the No. 15 terminal of climate control unit connector B (26P) and body ground.Fig 5: Checking Continuity Between No. 15 Terminal Of Climate Control Unit Connector B (26P) & Body Ground
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Is there continuity?
- YES - Check for loose wires or poor connections at climate control unit connector B (26P) If the connections are good substitute a known-good climate control unit, and recheck If the symptom/indication goes away replace the original climate control unit.
- NO - Check for an open in the wire between the climate control unit and body ground If the wire is OK check for poor ground at G401.