LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2003 >> Element DX, 2.4 YH2, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System >> Oil Filter Feed Pipe Replacement

Oil Filter Feed Pipe Replacement

  1. Remove the oil filter (see ENGINE OIL FILTER REPLACEMENT  ).
  2. Remove the oil filter feed pipe.
    Fig 1: Removing Oil Filter Feed Pipe
    G03677325Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the two 20 x 1.5 mm nuts (A) onto the new oil filter feed pipe. Hold the nut with a wrench, then tighten the other nut.
    Fig 2: View Of 20 x 1.5 MM Nut
    G03677326Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Tighten the oil filter feed pipe to the engine block to 49 N.m (5.0 kgf.m, 36 lbf.ft), then remove the nuts from the oil filter feed pipe.
scientia non olet · About LEMON Manuals