Console Armrest Removal/ Installation

WARNING: This page is about a different car, the 2006 Acura MDX, 2005 Acura MDX, 2004 Acura MDX, and 2003 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Take care not to scratch the console and armrest.

Remove the console rear trim (see step 6 in CENTER CONSOLE REMOVAL/INSTALLATION ).
Remove the screws (A), then remove the rear hinge cover (B). Remove the hinge mounting screws (C).

Fig 1: Removing Rear Hinge Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Open the armrest (A) and remove the hinge mounting screws, then remove the armrest.

Fig 2: Opening And Removing Armrest
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the armrest in the reverse order of removal.