LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2003 >> Civic Si >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (PGM-FI System) >> CKP Sensor Replacement

CKP Sensor Replacement

WARNING: This page is about a different car, the 2006 Acura MDX, 2005 Acura MDX, 2004 Acura MDX, and 2003 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move the auto-tensioner to remove tension from the drive belt, then remove the belt (see DRIVE BELT INSPECTION ).
  2. Remove the crankshaft pulley (see CRANKSHAFT PULLEY REMOVAL AND INSTALLATION ).
  3. Remove the upper and lower front covers from the engine (see step 9 in TIMING BELT REMOVAL ).
  4. Remove the CKP sensor (A) from the oil pump.
    Fig 1: Removing CKP Sensor From Oil Pump
    G03639838Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the sensor in the reverse order of removal.
  6. Do the CKP pattern learn procedure (see CKP PATTERN CLEAR/CKP PATTERN LEARN ).
scientia non olet · About LEMON Manuals