LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2003 >> Civic Si >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Charging System) >> Alternator Removal and Installation >> Installation

Alternator Removal and Installation: Installation

WARNING: This page is about a different car, the 2006 Acura MDX, 2005 Acura MDX, 2004 Acura MDX, and 2003 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the alternator, and tighten the mounting bolt (A) and bracket mounting bolt (B).
    Fig 1: Installing Alternator And Tightening Mounting Bolt & Bracket Mounting Bolt
    G03639190Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Connect the alternator connector (A), BLK wire (B) to the alternator.
    Fig 2: Connecting Alternator Connector
    G03639191Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the harness bracket (C), then install the harness clamp (D).
  4. Install the drive belt (see DRIVE BELT REPLACEMENT  ).
  5. Install the ignition coil cover and intake manifold cover (see step 1 in IGNITION COIL REMOVAL/INSTALLATION ).
  6. Connect the positive cable to the battery first, then connect the negative cable.
  7. Enter the anti-theft codes for the radio and the navigation system.
  8. Enter the customer's audio presets.
  9. Do the power window control unit reset procedure (see RESETTING THE POWER WINDOW CONTROL UNIT ).
  10. Set the clock.
scientia non olet · About LEMON Manuals