LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2003 >> Civic Si >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> PGM-FI System (Hatchback) >> Knock Sensor Replacement

Knock Sensor Replacement

  1. Remove the intake manifold bracket (A).
    Fig 1: Removing The Intake Manifold Bracket
    G01399473Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Disconnect the knock sensor 1P connector.
  3. Remove the knock sensor (B).
  4. Install the sensor in the reverse order of removal.
scientia non olet · About LEMON Manuals