LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2002 >> Insight Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Automatic Transmission) >> A/T Interlock System >> Park Pin Switch Replacement

Park Pin Switch Replacement

WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the shift lever assembly (see SHIFT LEVER REMOVAL ).
  2. Remove the tape from the harness.
  3. Remove the harness band.
    Fig 1: Removing Harness Band
    G03705108Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the A/T gear position indicator panel, and move it up.
    Fig 2: Removing A/T Gear Position Indicator Panel
    G03705109Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Remove the park pin switch (A).
  6. Install the new park pin switch, and install the A/T gear position indicator panel.
  7. Route the harnesses along the harness guide (A), and tie the harnesses and guide with the new band (B).
    Fig 3: Routing Harnesses Along Harness Guide
    G03705110Courtesy of AMERICAN HONDA MOTOR CO., INC.
  8. Tie the harnesses together into bundles with new tape (A) in two places.
    Fig 4: Tying Harnesses Into Bundles With Tape
    G03705111Courtesy of AMERICAN HONDA MOTOR CO., INC.
  9. Tie the harnesses and the harness clamp (B) together into a bundle with tape (C).
  10. Install the shift lever assembly (see SHIFT LEVER INSTALLATION ).
scientia non olet · About LEMON Manuals