LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2002 >> Insight Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (PGM-FI System) >> IAT Sensor Replacement

IAT Sensor Replacement

WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the intake manifold cover (see step 1 in REMOVAL ).
  2. Disconnect the IAT sensor 2P connector (A).
    Fig 1: Disconnecting IAT Sensor 2P Connector
    G03704382Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the IAT sensor (B).
  4. Install the sensor in the reverse order of removal with a new O-ring (C).
scientia non olet · About LEMON Manuals