LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2002 >> Insight Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (PGM-FI System) >> CKP Sensor Replacement

CKP Sensor Replacement

WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move the auto-tensioner to remove tension from the drive belt, then remove the belt (see DRIVE BELT AUTO-TENSIONER REPLACEMENT ).
  2. Remove the crankshaft pulley, J35A6 engine (see CRANKSHAFT PULLEY REMOVAL AND INSTALLATION ), J35A7 engine (see CRANKSHAFT PULLEY REMOVAL AND INSTALLATION ).
  3. Remove the upper and lower front covers from the engine, J35A6 engine (see step 9 in TIMING BELT REMOVAL ), J35A7 engine (see step 9 in TIMING BELT REMOVAL ).
  4. Remove the CKP sensor (A) from the oil pump.
    Fig 1: Removing CKP Sensor From Oil Pump
    G03704384Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the sensor in the reverse order of removal.
  6. Do the CKP pattern learn procedure (see CKP PATTERN CLEAR/CKP PATTERN LEARN ).
scientia non olet · About LEMON Manuals