LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2002 >> Insight Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Charging System) >> Drive Belt Replacement >> J35A6 engine

J35A6 engine

WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move the auto-tensioner (A) with the belt tension release tool to relieve tension from the drive belt (B), then remove the drive belt.
    Fig 1: Moving Auto-Tensioner With Belt Tensioner Release Tool To Relieve Tension From Drive Belt (J35A6 Engine)
    G03703557Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Install the new belt in the reverse order of removal.
    NOTE: For belt routing, see the charging system component location index (see COMPONENT LOCATION INDEX & DRIVE BELT ROUTING  ).
scientia non olet · About LEMON Manuals