Sliding Door Latch Replacement
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Honda Odyssey, 2003 Honda Odyssey, 2002 Honda Odyssey, 2001 Honda Odyssey, and 2000 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Put on gloves to protect your hands.
- Remove these items:
- Door panel (see Sliding Door Panel Removal/Installation )
- Plastic cover, as necessary (see Component Location Index )
- Remove the bolts (A) and the bolts (B). Disconnect the door latch cable (C). If equipped, disconnect the auto-close cable (D), lower roller lever cable (E), and power door closer connector (F). Then remove the latch (G) through the hole in the door.
- Install the latch in the reverse order of removal, and note these items:
- Make sure the door locks and opens properly.
- If necessary, move the adjusting plate (A) to adjust the door latch cable (B) and the auto-close cable (C).
- Apply liquid thread lock to the adjusting plate mounting bolt (D) before reinstallation.
- When reinstalling the door panel, make sure the plastic cover is installed properly and sealed around its perimeter.
- For EX and EX-L models: Re-home the power sliding doors (see RE-HOMING THE POWER SLIDING DOORS ).