LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2002 >> Insight Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Wheel Alignment Specifications & Procedures) >> Jacking & Hoisting >> Hoist

Jacking & Hoisting: Hoist

WARNING: This page is about a different car, the 2004 Honda Odyssey and 2003 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: When removing heavy rear components such as suspension, fuel tank or spare tire, vehicle center of gravity may change and cause vehicle to tip forward.
  1. When removing heavy rear components such as suspension, fuel tank or spare tire, place tall safety stands under front of vehicle after hoisting.
  2. Place lift blocks onto reinforced support points of side body panels (between front and rear wheels). See Figure . These are same points as used with manufacturer-supplied jack. Lift hoist a few inches and rock vehicle to ensure vehicle is firmly supported. Completely lift vehicle and check for proper vehicle support.
scientia non olet · About LEMON Manuals