Washer Motor Test: Front
WARNING: This page is about a different car, the 2004 Honda Odyssey, 2003 Honda Odyssey, and 2002 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
Remove right front inner fender. Disconnect washer motor 2-pin connector. Using jumper wires, apply battery voltage to washer motor terminal No. 1 (Yellow/Black wire) and ground washer motor terminal No. 2 (Black wire). Washer motor should operate smoothly. If motor runs smoothly but little or no washer fluid is pumped, check for disconnected or blocked washer fluid hose or a clogged pump outlet in motor.