Without Power Tailgate
WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
- Open the tailgate.
- Remove the tailgate trim panel (see TRIM REMOVAL/INSTALLATION - TAILGATE AREA ).
- Disconnect the 3P connector from the actuator.
- Check for continuity between the terminals. There should be continuity between the No. 2 and No. 3 terminals when the tailgate lock knob switch in the UNLOCK position and no continuity when the switch is in the LOCK position.
- If the continuity is not as specified, replace the tailgate lock actuator.